Suppliers of MAN diesel and gas engines

The 2G Energy AG is a leading international manufacturer of cogeneration units (CHP) for the point-of-use provision of power and heat using gas engines driven by natural gas, bio-methane, biogas, digester gas, landfill gas or hydrogen. Their portfolio encompasses systems with an electric output of 20 to 4000 kW. Alongside their headquarters in Heek in Münsterland, which is responsible for development and production, 2G also has an additional production location in America.

Key areas:

• Service
• Research & Development
• Production

Diesel and gas-powered energy generating sets with outputs ranging from 50 to 5000 kVA. Designed for continuous, emergency, peak load or CHP usage in a range of applications. Available as stationary, mobile and portable units, installed in either protective housing or a container. Additionally, we offer a wide range of control systems and switchgears for single or parallel operation, as well as all the necessary accessories.

BAYERN BHKW has over 30 years of experience with biogas, natural gas and landfill gas systems, as well as with diesel generator sets – both as a manufacturer and as an operator. Thus, our customers benefit from our extensive experience and our expert knowledge of cogeneration units.

We offer compact, module-design cogeneration units and gensets. Our standard portfolio covers an output range of 50 KW to 2 MW.

Key areas:

• Biogas cogeneration units
• Natural gas cogeneration units
• Diesel cogeneration units

Manufacturer of biogas systems from design through to commissioning

Bosch KWK Systeme GmbH has been developing and constructing tailor-made CHP systems and CHP modules since 1983, thus looking back on decades of experience as plant manufacturers in the combined heat and power industry. The portfolio is completed by CO₂-free energy conversion achieved by using ORC systems which convert waste heat into electricity and the compressed air and heat power plant (CHP CA 570 NA) which makes it possible to achieve energy efficient generation of compressed air through a gas engine powered compressor.

Dreyer & Bosse is among the world’s leading technological system providers for point-of-use generation of power and heat. We offer tailor-made cogeneration units (CHP) for biogenic gases and natural gases, as well as gas purification systems.

Key areas:

• Biogas
• Natural gas
• Digester gas

We have been producing cogeneration units for biogas installations since 1992. As an OEM and service partner of the MAN Truck & Bus AG, we exclusively use MAN gas engines with an electrical output of between 40 kW and 530 kW. Our core focus is on the use of special gases, such as biogas, digester gas and landfill gas. After the commissioning stage, we continue to support our customers by offering maintenance and technical support for our MAN gas engines. You can find out more about this on our website.

Key focus:

• CHP units for biogas, digester gas, landfill gas and natural gas

As an owner-operated company with a large range of series module products, we develop client-specific systems for use in a wide spectrum of applications. At the same time, we offer our customers a variety of different types of CHP units – for natural, bio, digester, landfill and liquid gases – in the output range of 20 to 530 kW, and support them in everything from planning, construction, assembly and commissioning of their systems, right through to maintenance.

Key areas:

• Planning, construction and assembly
• Installation, commissioning and maintenance
• Service and sales

ETW Energietechnik GmbH designs and builds cogeneration units for combining heat and power.

As an owner-operated family business, ETW had a turnover of approx. EUR 34 million in 2015 and employs 80 people at its location in Moers.

With over 25 years of experience in plant engineering, gas processing and energy generation, ETW has developed modern, energy-efficient procedures which allow for biogas to be processed to the same level of quality as natural gas. The Pressure Swing Adsorption (PSA) procedure established within the industry has been adapted to the needs of the bio-methane market and now rounds off the company’s product portfolio.

Internationally, ETW has partnerships in most EU countries and offers all-round installation, service and maintenance of its systems in the area.

Key areas:

• Plant engineering
• CHP gensets/service
• Diesel gensets

German company EURO-DIESEL GmbH, with its headquarters in Willich in the Rhineland is a full subsidiary of the Belgian EURO-DIESEL S.A., established in 1989. Today, EURO-DIESEL employs more than 200 people worldwide and is considered to be the pacesetter when it comes to highly-sophisticated uninterruptable power supply technology. EURO-DIESEL GmbH covers the group’s entire service portfolio within the German market for development, project planning, manufacture, assembly and service of emergency power systems and dynamic diesel UPS systems. Alongside the design of new installations, EURO-DIESEL also carries out modernisations and extensions to existing installations to achieve an uninterruptable power supply.

Key areas:

• Emergency generators
• Diesel UPS systems

Throughout more than 50 years, Frerk Aggregatebau GmbH has established itself as a market leader in energy supply systems with innovative design solutions. They produce complete systems – from the first design through to on-site commissioning – and also offer services for the entire life cycle upon request.

Generator sets in low- and medium-voltage applications with an output of up to 10 MW vary from black start units to emergency power systems, as well as CHP modules with engines, generators and components from leading manufacturers.

Key areas:

• Output range: Diesel, gas, HFO, crude oil up to 10 MW
• Applications: Emergency power, CHP, Black Start
• Key customer areas: OEM, international customer contracts, end users

Since 1975, Hubert Tippkötter GmbH has been planning customised energy technology systems tailored to the client’s local conditions. This includes sophisticated heating oil, liquid gas, biogas and natural gas CHP in line with BDEW [the German Association for Energy and Water Management] medium-voltage guidelines, with outputs ranging from 5 to over 500 kW, as well as stationary and mobile emergency power systems (emergency generators) with outputs between 3 and 2500 kVA.

Key areas:

• Manufacturer of heating oil CHP, natural gas CHP and liquid gas CHP
• Manufacturer of stationary emergency power systems (emergency generators) and PTO generators
• Maintenance and repair of CHP and emergency power systems

Kuntschar und Schlüter GmbH is a manufacturer of cogeneration units (CHP) with small and medium outputs. The manufactured systems are designed for use with natural gas, digester gas or biogas. Alongside the manufacture of the systems, the company is also involved in project planning, installation and maintenance. This makes the company is a single-source supplier, offering all the services needed for construction and subsequent operation.

Key areas:

• CHP natural gas
• CHP digester gas
• CHP biogas

Lindenberg-Anlagen GmbH is a privately owned German company with a history of manufacturing and engineering which dates back to 1948. Highly qualified engineers and quality-focused manufacturing have made us a premium supplier to the following industries: - Marine - Oil & Gas - General Power - CHP - Diesel Power Station - Offshore. Lindenberg-Anlagen GmbH also provides its customers with specialised machine housings and sound enclosures, as well as exhaust gas silencers for industrial services.

Key areas:

• Diesel Gensets for Marine and Stationary Power
• CHP Gas Gensets
• Complete Power Stations with Diesel Gensets

SES Energiesysteme GmbH manufactures gas-driven cogeneration units (CHP) with an electrical output of between 50 kW and 4500 kW. Their head office is in Berlin while production takes place in Leipzig. Flawless system operation is ensured through service centres in Berlin, Düsseldorf, Hamburg, Leipzig and Munich. The CHP specialists use their comprehensive expertise to implement ready-to-use installations with fully integrated steam, cooling or sound insulation solutions.

Key areas:

• CHP production, project management, commissioning and service
• CHP compact modules, installation in steel or concrete containers, plant engineering
• Professional, regional CHP service up to full maintenance

SOKRATHERM is one of the leading manufacturers and service providers of compact cogeneration units with outputs of 50–550 kW.

Since the company was established in 1977, around 1500 CHP compact modules have been delivered, providing efficient, environmentally-friendly and reliable energy sources to hospitals, swimming pools, hotels and factories.

For almost 30 years now, SOKRATHERM has been relying on the quality of MAN gas engines.

Key areas:

• Natural gas-powered CHP compact module 50–550 kW
• Digester gas-powered CHP compact module 30–550 kW
• Biogas-powered CHP, Propane gas CHP

• CHP manufacturer of 8 to 956 kW fuels: - natural gas, biogas, heating oil, plant oil, methanol/ethanol
• Emergency generators
• Energy management
• Automation, visualisation
• Refrigeration systems
• Maintenance service
• Globally active

Key areas:

• CHP
• Maintenance service
• Container

We have been leading specialists in the production of stationary and mobile generators for emergency power, peak load supply and continuous operation for more than 50 years. Our strength is our ability to develop system solutions which meet the customer’s individual needs.

Key areas:

• All types of stationary and mobile diesel generators
• Switchgear construction and specialist technologies
• Maintenance, design, consulting and customer training courses

Company founded in 2004. Began with service and maintenance of cogeneration units and CHP systems. Then moved into the manufacture of cogeneration units (biogas, natural gas, vegetable oil). In addition, supplier of gas treatment systems for biogas. Switchgear construction for CHP and emergency power systems. Modernising and optimising (repowering) of existing CHP systems to improve their efficiency levels.

Key areas:

• Service, maintenance and repairs on CHP systems
• Repowering of CHP systems
• Manufacture of CHP systems in the biogas and natural gas sectors

Since the company was founded in 2009, YADOS GmbH has found itself growing steadily. We currently have 170 highly-qualified and committed members of staff on our permanent team. As a modern, European business, our core focus is on energy efficiency and renewable energies. Thanks to the long years of experience of our employees, YADOS has established itself as one of the most competent suppliers of local and district heating technology. The service package offered by YADOS covers four areas: energy generation, compact heating stations, heat distribution stations and control and communication technologies. This means that we are able to cover the entire project spectrum, from production through to supply.

Key areas:

• Energy generation
• Heating and cooling transfer stations
• Heating and cooling distribution systems